Filter
Top Products
1-2
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
OL-10101-02
Chapter 1 Overview
Features
Certain Cisco Long-Reach Ethernet (LRE) customer premises equipment (CPE) devices are not
supported by certain Catalyst
2950 LRE switches. In Table 1-2, Yes means that the CPE is supported by
the switch; No means that the CPE is not supported by the switch.
This section describes the features supported in this release:
Note Some features require that you have the EI installed on your switch. For a list of the switches that support
the EI, see Table 1-1, or see the release notes for this release.
Ease of Deployment and Ease of Use
The switch ships with these features to make the deployment and use easier:
• Express Setup for quickly configuring a switch for the first time with basic IP information, contact
information, switch and Telnet passwords, and Simple Network Management Protocol (SNMP)
information through a browser-based program.
• User-defined Smartports macros for creating custom switch configurations for simplified
deployment across the network.
• Embedded device manager GUI for configuring and monitoring a single switch through a web
browser. For information about launching the device manager, see the getting started guide. For more
information about the device manager, see the switch online help.
• Network Assistant application for
–
Simplifying and minimizing switch and switch cluster management from anywhere in your
intranet.
Catalyst 2950T-48-SI SI
Catalyst 2955C-12 EI
Catalyst 2955S-12 EI
Catalyst 2955T-12 EI
1. SI = standard software image
2. EI = enhanced software image
Table 1-1 Switches Supported (continued)
Switch Software Image
Ta b l e 1-2 LRE Switch and CPE Compatibility Matrix
LRE Devices
Catalyst 2950ST-8 LRE
switch
Catalyst 2950ST-24 LRE
switch
Catalyst 2950ST-24 LRE 997
switch
Cisco 575 LRE
CPE
Yes Yes No
Cisco 576 LRE 997
CPE
No No Yes
Cisco 585 LRE
CPE
Yes Yes No