Filter
Top Products
Contents
xv
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.10, Part Number 78-11603-01 Rev. D0, July 2001
Selection of Connection Identifier 24-10
Routing VPCs over Virtual Trunks 24-10
VPC Configuration with the ATM Cloud 24-10
Virtual Trunk Interfaces 24-11
Virtual Trunk Traffic Classes 24-11
Virtual Trunk Transmit Queuing 24-12
General Procedure to Set Up a Trunk 24-12
Setting up a BNI Virtual Trunk through an ATM Cloud 24-13
Setting up a BXM or UXM Virtual Trunk through an ATM Cloud 24-15
Example: Virtual Trunk Across an ATM Network 24-17
Adding Virtual Trunks Using BNI Cards 24-19
Command Overview 24-20
Primary Configuration Commands 24-20
Configuration using cnftrk 24-20
Configuration with cnfrsrc 24-21
Configuration with cnftrkparm 24-21
APS Redundancy 24-21
Virtual Trunk Commands 24-22
Virtual Trunks Commands Common to BXM and UXM 24-22
Virtual Trunk UXM Commands 24-23
Virtual Trunk BXM/BNI Commands 24-23
Compatibility Between Cards in Virtual Trunks 24-24
Virtual Trunking Support on BPX and IGX in Release 9.2 24-24
Virtual Trunking Interactions with Other Features 24-25
Supported Card Types 24-26
CHAPTER
25 Configuring SONET Automatic Protection System 25-1
Introduction 25-1
Implementation for BXM Cards 25-2
Tiered Management Control 25-2
Manual Operation 25-3
Operation Criteria 25-4
APS Front Card Displays 25-5
APS 1+1 LED Displays 25-5
APS 1+1 (Card and Line Redundancy) 25-5
APS +1 Redundancy Criteria 25-7