Filter
Top Products
Figures
xxx
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.10, Part Number 78-11603-01 Rev. D0, July 2001
Figure 5-4 BXM-T3/E3 Front Panel, 12-Port Card Shown 5-13
Figure 5-5 SMF-622-2, SMFLR-622-2, and SMFXLR-622-2 Back Card 5-15
Figure 5-6 BXM-155-8 Port Backcard, MMF, SMF, or SMFLR 5-16
Figure 5-7 BPX-STM1-EL-4 Back Card 5-17
Figure 5-8 BPX-T3/E3 Back Card, 12-Port Option Shown 5-18
Figure 5-9 Y-Cabling of SMF-622 Series Backcards 5-19
Figure 5-10 BXM SMF-155-8R Backcard 5-21
Figure 5-11 BXM APS Redundant Frame Assembly 5-22
Figure 5-12 BXM Port (Access UNI) Ingress Operation 5-23
Figure 5-13 BXM Port (Access, UNI) Egress Operation 5-24
Figure 5-14 BXM Trunk Ingress Operation 5-25
Figure 5-15 BXM Trunk Egress Operation 5-26
Figure 7-1 Laser Information Label 7-3
Figure 7-2 Cabinet Mounting Options for the BPX Shelf 7-7
Figure 7-3 BPX Shelf and T-Rail (Open Rack) or Equivalent Mounting Options 7-8
Figure 7-4 Rack Mounting Dimensions, DC Powered Shelf 7-11
Figure 7-5 Rack Mounting Dimensions, AC Powered Shelf 7-12
Figure 7-6 Removing an Air Intake Grille 7-13
Figure 7-7 Temporary Spacer Bar and Support Brackets Installation 7-13
Figure 7-8 BPX Switch Shelf Aligned with Temporary Support Brackets and Bar 7-14
Figure 8-1 Location of DC Power Entry Module(s), Cabinet Rear View 8-2
Figure 8-2 BPX Shelf Aligned with Temporary Support Brackets and Bar 8-3
Figure 8-3 BPX Shelf with Rear Rail Mounting at Setback of 19.86 inches 8-4
Figure 8-4 Rear Mounting Brackets, with 19.86 Inch Rear Rail Setback (DC Systems) 8-5
Figure 8-5 Rear Mounting Brackets, 19.86 Inch Rear Rail Setback (AC-Systems) 8-5
Figure 8-6 Assembly of Router in Router Enclosure 8-7
Figure 8-7 Installing the Router Enclosure Assembly in the Cisco BPX 7650 Cabinet 8-8
Figure 8-8 Installing the Router Enclosure Assembly in a 19-inch Open Rack 8-9
Figure 8-9 Installing the Router Enclosure Assembly in a 23-inch Open Rack 8-10
Figure 9-1 BPX Switch Aligned with Temporary Support Brackets and Spacer Bar 9-2
Figure 9-2 BPX Switch with Rear Rail Mounting at Setback of 30 Inches 9-3
Figure 9-3 Rear Mounting Brackets, Detail 9-3
Figure 9-4 Rear Mounting Brackets, with 30 Inch Rear Rail Setback (DC Systems) 9-4
Figure 9-5 Rear Mounting Brackets, 30 Inch Rear Rail Setback (AC-Powered Systems) 9-4
Figure 10-1 DC Power 10-3