Filter
Top Products
17-5
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.10, Part Number 78-11603-01 Rev. D0, July 2001
Chapter 17 Initial BPX 8600 Node Configuration
Summary of Commands
Figure 17-3 Configuring the Node Interface for a Local Control Terminal
Figure 17-4 Removing a Node From the Network
Figure 17-5 Add an Interface Shelf to the Network
Summary of Commands
Table 17-1 Here are the names and brief descriptions of each node command:
Log on to
a node
Local or
remote?
:Set-up trunks
CNFTERM CNFTERMFUNC WINDOW
Another
node?
Local
Remote
Yes
No
VT
S5299
Log on to
a node
Local or
remote?
End
DELTRK
(see chapter 4 for more information)
Another
node?
Local
Remote
Yes
No
VT
S5300
Log on to
a node
Local or
remote?
End
Another
node?
Local
Remote
Yes
No
VT
S5301
ADDSHELF
Table 17-1 Commands for Setting Up a Node
Name Description
addalmslot Add an alarm slot
addcdred Add card redundancy for SONET APS 1+1 across two BXM cards
addctrlr Add a PNNI VSI controller to a BPX node through an AAL5 interface shelf
addshelf Add a trunk between an IGX or BPX core switch shelf and an interface shelf
addyred Add Y-cable redundancy
cnfasm Configure ASM card
cnfdate Configure date
cnffunc Configure system function
cnfname Configure node name
cnfprt Configure printing functions