Filter
Top Products
18-2
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.10, Part Number 78-11603-01 Rev. D0, July 2001
Chapter 18 Configuring Trunks and Adding Interface Shelves
Configuring Trunks
Setting Up a Trunk
Before executing the commands in this section, you must have finished setting up the nodes (see the
“Initial BPX 8600 Node Configuration” chapter.) Also, the front and back cards that support the
proposed line type and communication technology must reside in the slot intended for the trunk.
IGX NTM BC-SR Subrate FastPacket
IGX NTM BC-Y1 Y1 FastPacket
IGX UXM BC-UAI-2OC3-SMF,
BC-UAI-2STM-1-SMF
BC-UAI-4OC3-SMF,
BC-UAI-4STM-1-SMF
BC-UAI-4OC3-MMF
BC-UAI-4STM-1-MMF
BC-UAI-4T1-IMA DB15,
BC-UAI-4E1-IMA DB15,
BC-UAI-4E1-IMA BNC
BC-UAI-8T1-IMA DB15,
BC-UAI-8E1-IMA DB15,
BC-UAI-8E1-IMA BNC
BC-UAI-3T3
BC-UAI-6T3
BC-UAI-3E3
BC-UAI-6E3
OC-3 (STS)
OC-3 (STM1)
OC-3 (STS)
OC-3 (STM1)
OC-3 (STS)
OC-3 (STM1)
T1
E1
E1
T1
E1
E1
T3
T3
E3
E3
ATM
IGX UXM BC-6T3, BC-6E3
BC-3T3, BC-3E3
BC-UAI-3T3
BC-UAI-6T3
BC-UAI-3E3
BC-UAI-6E3
T3, E3
T3, E3
T3
T3
E3
E3
ATM
IGX ALM/B BC-BTM-HP-T3
BC-BTM-HP-E3
T3, E3 ATM
IGX BTM AIT-T3, AIT-E3, AIT-E2,
AIT-HSSI, BTI-E1
T3, E3, E2, E1,
HSSI
ATM
BPX BNI LM-3T3, LM-3E3 T3, E3 ATM
BPX BNI-155,
BNI-155E
2OC3-SMF or
2OC3-MMF
OC-3 (STS) ATM
BPX BXM-155-8 MMF-155-8
SMF-155-8
SMFLR-155-8
OC-3 (STS) ATM
BPX BXM-155-4 MMF-155-4
SMF-155-4
SMFLR-155-4
OC-3 (STS) ATM
BPX BXM-622-2 SMF-622-2
SMFLR-622-2
OC-12 (STM4) ATM
Table 18-1 Supported Card Types (continued)
Node Type Front Card Back Card Line Types Technology