Filter
Top Products
21-42
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.10, Part Number 78-11603-01 Rev. D0, July 2001
Chapter 21 Configuring ATM Connections
ATM Connection Configuration
Figure 21-18 ATFX Connection Prompt Sequence
Frame Relay-to-ATM Foresight Translational Service Interworking
Connections
A Frame Relay-to-ATM Foresight (ATFXFST) Translational Service Interworking connection that is
configured as an Abr connection with ForeSight. ForeSight congestion control is automatically enabled
when connection type ATFXFST is selected. A number of the ATM and Frame Relay connection
parameters are mapped between each side of the connection.
The parameters for an ATFXFST connection are shown in Figure 21-19 in the sequence in which they
occur during the execution of the addcon command.
ATFX
PCR(0+1)
%Util
CDVT(0+1)
SCR
MBS
Policing (1, 2, 3, 4, or 5)
VC QDepth
EFCI
IBS
For policing prompt:
1 = VBR.1
2 = VBR.2
3 = VBR.3
4 = PCR policing only
5 = policing off
VC QDepth maps to VC Queue max for frame relay.
EFCI maps to ECN for frame relay.
IBS maps to C max for frame relay.
Note: FBTC (Frame based traffic control - AAL5,
same as FGCRA) is automatically set to yes.
28814
1
2
1
2