Filter
Top Products
21-26
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.10, Part Number 78-11603-01 Rev. D0, July 2001
Chapter 21 Configuring ATM Connections
ATM Connection Configuration
CLP Lo/EPD [35/35] 1–100%
EFCI [30/30]
For ATFR/ATFST [100/100]
1–100%
RIF:
For ForeSight:
max[PCR/128, 10]
For Abr STD[128]
If ForeSight, then in absolute (0–PCR)
If Abr then 2
n
(1–32768)
RDF:
For ForeSight [93]
For Abr STD [16]
If ForeSight, then %
(0%–100%)
If Abr then 2
n
(1–32768)
Nrm[32], BXM only 2–256 cells
FRTT[0], BXM only 0–16700 msec
TBE[1,048,320], BXM only 0–1,048,320 cells
(different max range from TM spec. but limited by
firmware for CRM (4095 only) where
CRM=TBE/Nrm)
IBS[1/1] 0–24000 cells
Trunk cell routing restrict (Y/N) [Y] Y/N
Table 21-7 Connection Parameter Descriptions
Parameter Description
PCR Peak cell rate:
The cell rate which the source may never exceed
%Util % Utilization; bandwidth allocation for: rt/nrt-Vbr, Cbr, Ubrit’s PCR*%Util, for Abr it’s
MCR*%Util
MCR Minimum Cell Rate:
A minimum cell rate committed for delivery by network
CDVT Cell Delay Variation Tolerance:
Controls time scale over which the PCR is policed
Table 21-6 Connection Parameters with Default Settings and Ranges (continued)
Parameter with [Default Setting] BXM T3/E3, OC-3 & OC-12 Range