Cisco Systems BPX 8600 Series Switch User Manual


 
23-34
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.10, Part Number 78-11603-01 Rev. D0, July 2001
Chapter 23 Configuring BXM Virtual Switch Interface
Class of Service Templates and Qbins
VC Descriptor Parameters
Table 23-11 describes the connection parameters that are listed in the preceding tables and also lists the
range of values that may be configured, if not already preconfigured.
Every Service Class does not include all parameters. For example, a Cbr service type have fewer
parameters than an Abr service type.
Table 23-10 MPLS Service Types
Parameter CoS 0/4 CoS 1/5 CoS 2/6 CoS3/7 Tag-Abr
Qbin# 1011121314
UPC Enable 0 0 0 0 0
UPC CLP Selection 0 0 0 0 0
Policing Action (GCRA #1) 0 0 0 0 0
Policing Action (GCRA#2) 0 0 0 0 0
PCR ----cr/10
MCR ----0
SCR - - - - P_max
ICR ----100
MBS -----
CoSMinBW 00000
CoSMaxBW 0000100
ScalingClass 33212
CACTreatment 11111
VC Max Q_max/4 Q_max/4 Q_max/4 Q_max/4 cr/200ms
VCCLPhi 7575757575
VCCLPlo 3030303030
VCEPD 9090909090
VC EFCI 60 60 60 60 30
VC discard selection 0 0 0 0 0
VSVD/FCES - - - - 0
ADTF - - - - 500
RDF ----16
RIF ----16
NRM ----32
TRM ----0
CDF ----16
TBE - - - - 16777215
FRTT ----0