Filter
Top Products
23-38
Cisco BPX 8600 Series Installation and Configuration
Release 9.3.10, Part Number 78-11603-01 Rev. D0, July 2001
Chapter 23 Configuring BXM Virtual Switch Interface
Class of Service Templates and Qbins
Full Support for Tag Abr and ATMF without Tag CoS
Templates 6 (with policing) and 7
10 (Tag 0,4,1,5,2,6,3,7
Default, Ubr)
300,000 100% 95% 100% EPD
11 (VbrRt) 53000 80% 60% 100% EPD
12 (VbrNrt) 53000 80% 60% 100% EPD
13 (Tag-Abr) 300,000 100% 95% 6% EPD
14 (Abr) 105000 80% 60% 20% EPD
15 (Cbr) 4200 80% 60% 100% CLP
Full Support for Tag CoS and reduced support for ATMF
Templates 8 (with policing) and 9
10 (Cbr, Vbr-rt) 4200 80% 60% 100% CLP
11 (Vbr-nrt, Abr) 53000 80% 60% 20% EPD
12 (Ubr, Tag 0,4) 300,000 100% 95% 100% EPD
13 (Tag 1, 5, Tag-Abr) 300,000 100% 95% 6% EPD
14 (Tag 2,6) 300,000 100% 95% 100% EPD
15 (Tag 3, 7) 300,000 100% 95% 100% EPD
Table 23-14 Service Class Template Default Settings
Parameter with Default Setting Label PNNI
MCR Tag0–7: N/A
TagAbr: 0% of PCR
Abr: 0%
AAL5 Frame Base Traffic
Control (Discard Selection)
EPD Hystersis
CDVT(0+1) 250,000 250,000
VSVD Tag0–7: N/A
TagAbr: None
Abr: None
SCR Tag0–7: N/A
TagAbr: 0
Vbr: 100%
Abr: 0
MBS Tag0–7: N/A
TagAbr: 0
Vbr: 1000
Table 23-13 Qbin Default Settings (continued)
Qbin
Max Qbin
Threshold (usec) CLP High
CLP
Low/EPD EFCI
Discard
Selection