Filter
Top Products
1-113
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
OL-2239-05
Chapter1 Overview of Cisco uBR7200 Series Software
cops tcp window-size
Circuit Interface Identification MIB
The Circuit Interface Identification MIB feature adds support for a new Cisco enterprise MIB, used to assist
in SNMP monitoring of circuit-based interfaces. The Circuit Interface MIB
(CISCO-CIRCUIT-INTERFACE-MIB) provides a MIB object that can be used to identify individual
circuit-based interfaces (for example, interfaces using ATM or Frame Relay). This user-specified
identification will then be returned when linkup and linkdown SNMP traps are generated for the interface.
The Circuit Interface MIB consists of a single table, with each row being a sequence of two objects:
Circuit Interface Description (cciDescr) and Circuit Interface Status (cciStatus). The “cciDescr” object
is used to identify circuits using a textual description of up to 255 characters specified by the user (note
that MIB objects are modified using network management system [NMS] applications, and can not be
configured using the Cisco IOS command-line interface).
CISCO-SMI.my
CISCO-SMI-V1SMI.my
This module specifies the SMI for Cisco’s
enterprise MIBs.
12.0(6)SC
12.1(2)EC
12.2(4)XF1
(12.2 BC)
CISCO-TC.my
CISCO-TC-V1SMI.my
This module defines the textual conventions
used in Cisco’s enterprise MIBs.
12.0(6)SC
12.1(2)EC
12.2(4)XF1
(12.2 BC)
IF-MIB.my
IF-MIB-V1SMI.my
This module describes generic objects for the
Layer 3 network interface sublayers. This MIB is
an updated version of MIB-II's if table and
incorporates the extensions defined in RFC 2233.
12.1(2)EC
12.2(4)XF1
(12.2 BC)
DOCS-IF-MIB.my
DOCS-IF-MIB-V1SMI.my
This module describes the DOCSIS-compliant
Radio Frequency (RF) interfaces in cable modems
(CMs) and the CMTS, as defined in RFC 2670.
12.1(2)EC
12.2(4)XF1
(12.2 BC)
DOCS-BPI-MIB.my This module—available in an SNMPv2 version
only—describes the attributes for the
DOCSIS-specified Baseline Privacy Interface
(BPI) on CMs and the CMTS.
12.1(2)EC
12.2(4)XF1
(12.2 BC)
CISCO-DOCS-EXT-MIB.my
CISCO-DOCS-EXT-
MIB-V1SMI.my
This module extends the DOCSIS standard RFI
MIB (DOCS-IF-MIB) with Cisco-specific
extensions, such as QoS attributes and connection
status and other information regarding the CMs
and CPE devices supported by the CMTS.
12.1(2)EC
12.2(4)XF1
(12.2 BC)
CISCO-DOCS-REMOTE-QUERY-
MIB.my
This module facilitates SNMP polling of remote
CMs on a CMTS.
12.1(2)EC
12.2(4)XF1
(12.2 BC)
CISCO-CABLE-
SPECTRUM-MIB.my
CISCO-CABLE-
SPECTRUM-MIB-V1SMI.my
This module describes the spectrum
management flap list attributes.
12.1(2)EC
12.2(4)XF1
(12.2 BC)
1. The Cisco IOS 12.2 BC release train continues the MIBs and most features introduced in the Cisco IOS 12.2 XF release train.
2. Not supported in the CiscoIOS12.0 SC release train.
Table1-14SNMP and Cable-Specific MIBs Supported on CiscouBR7200Series Routers (continued)
MIB Filename Description
Introduced in
Releases