Filter
Top Products
1-43
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
OL-2239-05
Chapter1 Overview of Cisco uBR7200 Series Software
Supported Software Features for the Cisco uBR7200 Series
Command Modes User EXEC, Privileged EXEC
Command History
Usage Guidelines The mem-stat, memory, and proc-cpu keywords execute the related command on the processor that
runs on added to obtain the relevant information from the onboard processor on Broadband Processing
Engine (BPE) cable interface line cards, such as the CiscouBR-MC16U/X, CiscouBR-MC28U/X, and
CiscouBR-MC5X20S/U cards. This allows you to obtain information that is specific for that particular
cable interface card, as opposed to having to run these commands on the entire router.
Note The mem-stat, memory, and proc-cpu options are not available for cable interface line cards that do
not contain an onboard processor (for example, the CiscouBR-MC16C card).
Examples The following is sample output for the downstream connection for slot 3 on port 0 on CiscoCMTS router
from the show controllers cable downstream command:
CMTS01# show controllers cable 3/0 downstream
Cable 3/0 Downstream is up
Frequency not set, Channel Width 6 MHz, 64-QAM, Symbol Rate 5.056941 Msps
FEC ITU-T J.83 Annex A, R/S Interleave I=12, J=17
Release Modification
11.3 NA This command was introduced.
12.0(2)XC This command was modified to show a number of additional fields.
12.1(5)EC1 Support was added for the CiscouBR7100 series router, including
information about the CiscouBR7100 series integrated upconverter.
12.2(1)XF1 Support was added for the CiscouBR10012 router.
12.0(16)SC2,
12.1(10)EC1,
12.2(4)BC1b
The algorithm for calculating the SNR value was enhanced for a more
accurate value.
12.2(15)CX Support was added for the CiscouBR-MC28U/X cable interface line card,
including the display of the number of packets dropped because they were
for a Service Flow ID (SFID) of 0.
12.2(15)BC2b The mem-stat, memory, and proc-cpu options were added to obtain
processor information from the onboard processor on Broadband Processing
Engine (BPE) cable interface line cards, such as the CiscouBR-MC16U/X,
CiscouBR-MC28U/X, and CiscouBR-MC5X20S/U cards.
12.3(9a)BC Adds the tech-support option to improve information required during
technical support.