Filter
Top Products
1-45
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
OL-2239-05
Chapter1 Overview of Cisco uBR7200 Series Software
Supported Software Features for the Cisco uBR7200 Series
Syntax Description
For additional information about this and other commands, refer to the following document on
Cisco.com (updated through Cisco IOS Release 12.3(9a)BC):
• Cisco Broadband Cable Command Reference Guide
http://www.cisco.com/univercd/cc/td/doc/product/cable/bbccmref/index.htm
Cisco Quality of Service Features
Networks must provide secure, predictable, measurable, and sometimes guaranteed services. Achieving
the required Quality of Service (QoS) by managing delay, delay variation (jitter), bandwidth, and packet
loss parameters on a network becomes the secret to a successful end-to-end business solution. Cisco QoS
is the set of techniques to manage network resources. The CiscouBR7200series CMTS offers the
following Cisco QoS features, in addition to supporting additional DOCSIS QoS features.
• Cisco Network-Based Application Recognition (NBAR), page 1-46
• RTP Header Compression, page 1-46
For additional information, refer to the Cisco IOS Quality of Service Web page on Cisco.com:
http://www.cisco.com/warp/public/732/Tech/qos/qos_learnabout.shtml
page (Optional) Causes the output to display a page of information at a time. Use the
Return key to display the next line of output or use the space bar to display the next
page of information. If not used, the output scrolls (that is, does not stop for page
breaks).
password (Optional) Leaves passwords and other security information in the output. If not used,
passwords and other security-sensitive information in the output are replaced with the
label "<removed>" (this is the default).
cef (Optional) Displays information about the Cisco Express Forwarding (CEF) protocol
configuration and status.
ipc (Optional) Displays information about interprocess communications on the Cisco
router.
ipmulticast (Optional) Displays information about the IP multicast configuration and status.
isis (Optional) Displays information about the Connectionless Network Service (CLNS)
and Intermediate System-to-Intermediate System (IS-IS) routing protocol
configuration and status.
Note IS-IS support is provided only on CMTS platforms running CiscoIOS images
that have a “-p-” as part of the image name.
mpls (Optional) Displays information about Multiprotocol Label Switching (MPLS) on the
Cisco router, which instructs the routers and the switches in the network on where to
forward the packets based on preestablished IP routing information.
ospf (Optional) Displays information about the Open Shortest Path First (OSPF) routing
algorithm and status on the Cisco router.
rsvp (Optional) Displays information about the IP Resource Reservation Protocol (RSVP)
configuration and status.