Filter
Top Products
8-13
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
OL-2239-03
Chapter8 Troubleshooting the System
Using Cable Interface debug Commands
debug cable privacy (for Baseline Privacy)
To activate the debugging of baseline privacy, use the debug cable privacy command in privileged
EXEC mode. To disable debugging output, use the no form of this command.
debug cable privacy
no debug cable privacy
debug cable qos
To activate the debugging of QoS, use the debug cable qos command in privileged EXEC mode. To
deactivate debugging of QoS, use the no form of this command.
debug cable qos
no debug cable qos
When this command is activated, messages related to QoS parameters are displayed on the
CiscouBR10000series router console.
debug cable range (for Ranging Messages)
To activate the debugging of ranging messages from cableinterfaces on the HFC network, use the
debugcablerange command in privileged EXEC mode. To deactivate debugging of cableinterface
ranging, use the no form of this command.
debug cable range
no debug cable range
When this command is activated, ranging messages generated when cableinterfaces request or change
their upstream frequencies are displayed on the CiscouBR10000series router console.
debug cable receive (for Upstream Messages)
To activate the debugging of upstream messages from cableinterfaces, use the debug cable receive
command in privileged EXEC mode. To deactivate debugging of upstream messages, use the no form of
this command.
debug cable receive
no debug cable receive
When this command is activated, any messages generated by cable interfaces and sent to the
CiscouBR7200series router are displayed on the router console.