Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . .
Running Computer Setup 10-3
Writer: Betty Fessenden - Saved by: BLF - Saved date: 6/6/96
Part Number: 213569-001 - File name: CH10
Ports Menu
Use the Ports menu to change the factory-default input/output (I/O)
addresses and interrupt requests (IRQs) for the following ports:
Option Default
Serial/Infrared Serial: 3F8, IRQ 4
Infrared: 3E8, IRQ 4
Parallel 378, IRQ 7
MPEG Video Out Format: PAL, NTSC NTSC
Network Setup 300h, IRQ 10, RJ-45
NOTE: If you select conflicting settings for the ports, the system
will automatically change one of the settings.
Power Menu
Use the Power menu to change the factory-default settings for the
following options:
Option Default
Power Management Enabled While on Battery
Conservation Level Medium
Suspend timeout: 10 min.
Hibernation timeout: 1 hr.
Drive timeout: 6 min.
Screen timeout: 4 min.
Low-Battery Warning Beeps Enabled
Energy Saving Monitor Disabled
NOTE: Disabling the PC Card slots under the Security menu also
conserves power.
The factory-default setting for power management (Medium
Conservation Level While on Battery) provides a balance between
performance and battery life.