Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting 13-13
Writer: Betty Fessenden - Saved by: BLF - Saved date:6/14/96
Part Number: 213660-001 - File name: CH13
Solving Keyboard Problems
Problem Probable Cause Solution(s)
Keyboard is locked. You initiated QuickLock. Enter your password to
exit QuickLock.
Embedded numeric
keypad on computer
keyboard is
disabled.
Num Lock function is not
enabled.
Press the Fn
+
NumLk keys to
enable the Num Lock function and
embedded numeric keypad. The
Num Lock icon on the status panel
turns on (refer to Chapter 2,
"Keyboard and EasyPoint II
Pointing Device").
Solving Memory Problems
Problem Probable Cause Solution(s)
Memory count
during Power-On
Self-Test (POST) is
incorrect.
Optional memory expansion
board is installed incorrectly or
is defective.
Ensure that the optional memory
expansion board is installed
correctly (refer to Chapter 9,
"Installing an Optional Memory
Expansion Board").
"Out of Memory"
message is
displayed on the
screen or
insufficient memory
error occurs during
operation.
System ran out of memory for
the application.
Too many programs are open.
Refer to the application
documentation for memory
requirements.
Install additional memory.
Close any programs that you do
not need