Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . .
Before You Begin xvii
Writer: Betty Fessenden - Saved by: BLF - Saved date: 6/7/96
Part Number: 213660-002 - File name: PREFACE
Preparing for a Technical Support Call
If you cannot solve a problem using the troubleshooting tips in
Chapter 13 and the online Troubleshooting help, you may need to
call technical support. To receive the fastest possible solution when
you call, follow the instructions in Chapter 12 to run Compaq
Diagnostics and have the following available when you call:
■ The computer
■ Serial number, on the back of the computer behind the connector
door above the serial connector
■ Purchase date on invoice
■ Conditions under which the problem occurred
■ Error messages that occurred
■ Hardware configuration
■ Type of printer connected
■ Hardware and software you are using
■ Your Windows 95 product identification number (PIN). To
locate the PIN number, click the Start button, point to Settings,
click Control Panel, double-click the System icon, then click the
General tab. Your PIN number is below your name.
■ The printed error message log from Computer Checkup (TEST),
or a list of the devices and error messages received
■ Contents of View System Information (INSPECT), as well as
the CONFIG.SYS and AUTOEXEC.BAT files
Ordering Backup Diskettes
It is recommended that you create a backup of the preinstalled
software as described in Chapter 1. However, for an additional cost,
you can order backup diskettes from Compaq. Before calling to
order, be sure to have the computer serial number available. The
serial number is on the back of the computer behind the connector
door above the serial connector.
NOTE: If an order form was included with the computer, complete
the form and return it or call one of the numbers listed on the order
form.