Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . .
Appendix D
Two-Prong, Double-Insulated Power Cord Set Requirements D-1
Writer: Betty Fessenden - Saved by: BLF - Saved date: 6/14/96
Part Number: 213660-001 - File name: APPD
Two-Prong, Double-Insulated
Power Cord Set Requirements
Determine whether your AC power cord has a two-prong or three-
prong plug. This appendix presents the two-prong power cord
requirements. If you have a three-prong plug, go to Appendix E.
The wide-range input or automatic line switching feature of your
computer permits it to operate from any line voltage between 100
and 120 or 220 and 240 volts AC.
The power plug or power cord set (appliance coupler, flexible cord,
and wall plug) you received with your computer meets the
requirements for use in the country where you purchased your
computer.
Power cord sets for use in other countries must meet the require-
ments of the country where you use the computer. For more
information on power cord set requirements, contact your Compaq
authorized dealer, reseller, or service provider.
General Requirements
The requirements listed below are applicable to all countries:
1. The length of the power cord set must be at least 6.00 feet
(1.8 m) and a maximum of 9.75 feet (3.0 m).
2. All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the country
where the power cord set will be used.
3. The power cord set must have a minimum current capacity of
2.5A and a nominal voltage rating of 125 or 250 volts AC, as
required by each country’s power system.
4. The appliance coupler must meet the mechanical configuration
of an EN 60 320/IEC 320 Standard Sheet C7 connector, for
mating with appliance inlet on the AC Adapter.