Filter
Top Products
9-6 Dell PowerEdge 6100/200 System Installation and Troubleshooting Guide
drive, and then slide the drive slightly toward the
front of the chassis.
Refer to “DC Power Cables” earlier in this chapter to
determine the correct DC power cable connector to
use for the drive. Plug the DC power cable connector
into the 4-pin power input connector on the back of
the drive.
Select the connector on the SCSI cable that most eas-
ily reaches the new SCSI device, and press the
interface cable connector firmly into the drive’s
interface connector.
If you moved other drives at the beginning of this
step, snap them back into place.
Figure 9-7. Cable Connections for a SCSI Device in the External Drive Bays
Ultra/Wide SCSI host
adapter connector (SCSI B)
Ultra/Wide
SCSI cable
SCSI CD-ROM drive
DC power cable