Filter
Top Products
C-4 Dell PowerEdge 6100/200 System Installation and Troubleshooting Guide
FLOPPY 0 (Dell
default)
Enables 1.44-MB diskette drive size or autodetec-
tion. Disables 2.88-MB size detection.
Enables forced 2.88-MB diskette drive size
detection.
FLOPPY 1 (Dell
default)
Enables 1.44-MB diskette drive size or autodetec-
tion. Disables 2.88-MB size detection.
Enables forced 2.88-MB diskette drive size
detection.
VIDEO SLEEP
(default)
The Video Sleep Register resides at 03C3H.
The Video Sleep Register resides at 46E8H.
PWR CTRL
(default)
Disables the RTC power supply control.
Enables power supply control using the RTC.
RESERVED Reserved
(do not change)
.
*
Only one of these jumpers should have a jumper plug installed.
NOTE: For the full name of an abbreviation or acronym used in this table, see the abbreviation and acronym list.
Table C-1. System-Board Jumper and Switch Settings
(continued)
Jumper/Switch Setting Description
jumpered
unjumpered