Filter
Top Products
Messages and Codes 3-3
0375 Keyboard and Mouse
Swapped
0380 ECC SIMM failure, Board
in slot 1 SIMM #
0392 ECC SIMM failure, Board
in slot 2 SIMM #
0430 Timer Channel 2 Failure
0440 Gate-A20 Failure
0441 Unexpected Interrupt in
Protected Mode
0445 Master Interrupt Con-
troller Error
0446 Slave Interrupt Control-
ler Error
0450 Master DMA Controller
Error
0451 Slave DMA Controller
Error
0452 DMA Controller Error
0460 Fail-safe Timer NMI
Failure
0461 Software Port NMI Fail-
ure
0465 Bus Time-out NMI in Slot
0467 Expansion Board NMI in
Slot
0501 PCI System Error
0510 PCI Parity Error
0710 System Board Device
Resource Conflict
Table 3-1. System Messages
(continued)
Code Message
NOTE: For the full name of an abbreviation or acronym
used in this table, see the abbreviation and acronym list.
0711 Static Device Resource
Conflict
0800 PCI I/O Port Conflict
0801 PCI Memory Conflict
0802 PCI IRQ Conflict
0803 PCI Error Log is Full
0810 Floppy Disk Controller
Resource Conflict
0811 Primary IDE Controller
Resource Conflict
0812 Secondary IDE Controller
Resource Conflict
0815 Parallel Port Resource
Conflict
0816 Serial Port 1 Resource
Conflict
0817 Serial Port 2 Resource
Conflict
0820 Expansion Board Disabled
in Slot
0900 NVRAM Checksum Error,
NVRAM Cleared
0903 NVRAM Data Invalid,
NVRAM Cleared
0905 NVRAM Cleared By Jumper
0982 I/O Expansion Board NMI
in Slot
0984 Expansion Board Disabled
in Slot
0985 Fail-safe Timer NMI
Table 3-1. System Messages
(continued)
Code Message
NOTE: For the full name of an abbreviation or acronym
used in this table, see the abbreviation and acronym list.