Filter
Top Products
100
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
Installing and Configuring the Linux Host with the QLogic Driver
qliscsi-linux-3.22-1dkms/README.dkms
4. Install the DKMS RPM:
cd qliscsi-linux-3.22-1dkms
rpm -ivh dkms-2.0.5-1.noarch.rpm
Output example:
Preparing... ########################################### [100%]
1:dkms ########################################### [100%]
5. Install the QLogic driver RPM:
rpm -ivh qla4xxx-v3.22-1dkms.noarch.rpm
An example of console output reported by the driver RPM
installation is as follows:
Preparing... ########################################### [100%]
1:qla4xxx ########################################### [100%]
Creating symlink /var/lib/dkms/qla4xxx/v3.22/source ->
/usr/src/qla4xxx-v3.22
DKMS: add Completed.
Loading/Installing pre-built modules for 2.4.21-4.EL (i686).
Preparing kernel 2.4.21-32.0.1.ELsmp for module build:
(This is not compiling a kernel, only just preparing kernel symbols)
Storing current .config to be restored when complete
Running Red Hat style preparation routine
make clean....
using
/lib/modules/2.4.21-32.0.1.ELsmp/build/configs/kernel-2.4.21-i686-smp.config
make oldconfig.....
running dkms_mkkerneldoth....
Building module:
cleaning build area....
make KERNELRELEASE=2.4.21-32.0.1.ELsmp SMP=1
INCLUDEDIR=/lib/modules/2.4.21-32.0.1.ELsmp/build/include.........
cleaning build area....
DKMS: build Completed.
Running module version sanity check.
qla4010.o:
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/2.4.21-32.0.1.ELsmp/kernel/drivers/scsi/qla4xxx/
qla4022.o:
- Original module