Filter
Top Products
192
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
Configuring a Boot Device on an EMC Storage Array
Installing onto the boot device with the QLogic HBA v5.x-Series
driver
EMC only supports the Linux distributor's in-box driver that arrives
with the kernel. This simplifies the process of installing the OS on an
EMC storage array device. The Linux distributor's installer will detect
the QLogic iSCSI HBA and select the proper driver for the
installation.
To simplify the installation EMC recommends only having one LUN
presented by the targeted EMC storage array during the installation
process. Additional LUNs should be added after the OS is completely
installed and has been rebooted to ensure proper operation.