Filter
Top Products
166
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
Configuring a Boot Device on an EMC Storage Array
5. Insert the disk (described in Step 1) into either the floppy disk
drive or the CD drive, depending on the option selected in Step 4.
6. Click OK, then press ENTER.
The SCSI driver is loaded automatically.
7. The Disk Driver window displays, prompting for more drivers to
install. Click NO, then press ENTER.
8. Insert the current Linux Red Hat product CD #1 in the CD drive
(remove the iso-dd-kit CD first if necessary), then press ENTER.
9. Follow the on-screen instructions to complete the installation.
SLES10 OS SAN-boot installation with QLogic FCoE adapters
To install SLES10 SAN-boot with QLogic FCoE adapters:
1. Obtain the appropriate “DD” driver kit for the QLogic FCoE
adapter from the EMC-supported section of the QLogic website,
and copy it to the appropriate media (floppy disk or CD).
2. Insert the SLES10 CD #1 in CD drive and boot the system.
3. On the main installation screen, press F5.
4. The system prompts you to select Yes, No, or File.
Select Yes.
5. Select the installation option, then press ENTER
In response to the following prompt:
Please choose the driver update medium.
c. Make sure the dd-kit is inserted in proper drive (i.e., CD-ROM
or Floppy).
d. Select appropriate drive, then press ENTER. This loads the
driver update to the system.
6. If the driver update was successful, the following message
displays:
Driver Update OK.
Press ENTER.
7. If the system prompts you to update another driver, click BACK,
then press ENTER.