Filter
Top Products
Installing onto the boot device with the QLogic HBA v3.x-Series driver
183
Configuring a Boot Device on an EMC Storage Array
Upgrading the kernel
After successfully completing the installation and rebooting the host,
the kernel may be upgraded to a newer kernel revision to take
advantage of fixes and features incorporated into the newer kernel
errata.
Note: Please refer to the EMC Support Matrix for supported kernel revisions.
EMC recommends installing the kernel packages, rather than
upgrading them, so that either kernel version may be used for boot.
In addition, if a boot diskette was created during the original
installation, an updated copy should be created after the upgrade.