Filter
Top Products
Configuring persistent binding for the Linux QLogic iSCSI HBA
139
Connecting to the Storage
3. Unbind Target
4. Configure Target Parameters
5. Add A Target
6. Configure Target Authentication Menu
7. List LUN information
8. Save Target changes
9. Set Working Adapter
10. Refresh
11. Exit
enter selection:
2
Target ID: 64 IP: 51.50.51.198 Port: 3260
ISCSI Name: iqn.1992-04.com.emc:cx.apm00033300794.a0
Alias: 0794.a0
State: Session Active
Target ID: 65 IP: 51.50.51.199 Port: 3260
ISCSI Name: iqn.1992-04.com.emc:cx.apm00033300794.b0
Alias: 0794.b0
State: Session Active
Target ID: 66 IP: 51.51.51.198 Port: 3260
ISCSI Name: iqn.1992-04.com.emc:cx.apm00033300794.a1
Alias:
State: Session Failed
Target ID: 67 IP: 51.51.51.199 Port: 3260
ISCSI Name: iqn.1992-04.com.emc:cx.apm00033300794.b1
Alias:
State: Session Failed
Enter a Target ID:
64
Save the target binding by selecting option 8:
scix HBA Target Menu
HBA Target Menu
-------------------------------------------------------------
Current QLA4010 HBA/Port Information:
HBA Serial Number: FS20403A00911 HBA Port: 0
IP Address: 51.50.51.36 Link: Up
Port Name: iqn.2000-04.com.qlogic:qla4010.fs20403a00911
Port Alias:
-------------------------------------------------------------
1. List Targets
2. Bind Target
3. Unbind Target
4. Configure Target Parameters
5. Add A Target
6. Configure Target Authentication Menu
7. List LUN information
8. Save Target changes
9. Set Working Adapter
10. Refresh
11. Exit
enter selection:
8
3. Select 11 to exit the menu.