Filter
Top Products
112
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
Installing and Configuring the Linux Host with the QLogic Driver
2. Obtain the qliscsi-linux-5.00.4-2-install.tgz package
from the EMC-approved section of the QLogic website listed in
“Downloading the QLogic v3.x-Series iSCSI driver for the v2.4.x
kernel” on page 98.
3. Uncompress and extract the source files from the tar archive:
tar zxvf qliscsi-linux-5.00.4-2-install.tgz
The initial uncompression will provide you with the following:
qlaiscsi-linux-5.00.04-2-install/
qlaiscsi-linux-5.00.04-2-install/ql-iscsi-install
qlaiscsi-linux-5.00.04-2-install/revision.notes
qlaiscsi-linux-5.00.04-2-install/qla4xxx-5.00.04-1.noarch.rpm
qlaiscsi-linux-5.00.04-2-install/set_driver_param
qlaiscsi-linux-5.00.04-2-install/README.ql-iscsi-install.txt
qlaiscsi-linux-5.00.04-2-install/scix_linx86_1.0.25.0.tgz
qlaiscsi-linux-5.00.04-2-install/scix_linPPC_1.0.25.0.tgz
4. Install the QLogic iSCSI driver via the installation script
provided:
cd qliscsi-linux-5.00-4-install/
./ql-iscsi-install -i
An example of console output reported by the installation script:
#***************************************************#
# SANsurfer Driver Installer for Linux #
# Installer Version: 1.00.05 #
#***************************************************#
Kernel version: 2.6.9-22.ELsmp
Distribution: Red Hat Enterprise Linux AS release 4 (Nahant Update 2)
Found QLogic iSCSI Host Bus Adapter in the system
1: ISP4010
Installation will begin for following driver
1: qla4xxx version: 5.00.04
Preparing... ##################################################
qla4xxx ##################################################
qla4xxx -- Building the qla4xxx driver...
\
qla4xxx -- Installing the qla4xxx modules to
/lib/modules/2.6.9-22.ELsmp/kernel/drivers/scsi/qla4xxx/...
Loading module qla4xxx version: 5.00.04....
Loaded module qla4xxx