Filter
Top Products
90
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
Installing and Configuring the Linux Host with the QLogic Driver
What next? If the driver version is listed in Table 7, refer to the appropriate
section in “Installation instructions for the in kernel QLogic driver in
Linux 2.6.x kernels” on page 91.
If the driver version is not listed in Table 7, refer to “iSCSI out of
kernel driver versions” on page 95.
RHEL 5.3
Asianux 3.0 SP2
OEL 5.3
5.01.00.01.05.03-k9
SLES 11 GA 5.01.00-k8_sles11-04
SLES 11 GA (errata kernels equal to
or greater than 2.6.27.23-0.1.1)
5.01.00-k9_sles11-04
SLES 11 SP1 5.01.00.00.11.01-k14
RHEL 5.4
OEL 5.4
RHEL 5.5
OEL 5.5
AX3 SP3
5.01.00.01.05.04-k9
SLES 10 SP3 (kernel errata
2.6.16.60-0.57.1 and greater but less
than 2.6.16.60-0.67.1)
5.01.03.03.10.3-d5
SLES 10 SP3 (kernel errata
2.6.16.60-0.67.1 and greater)
5.01.03.03.10.3-d6
RHEL 5.6 5.02.04.02.05.06-d0
RHEL 5.7 5.02.04.01.05.07-d0
RHEL 6.0 5.02.00-k1
SLES 10 SP4 5.02.06.00.10.4-d0
RHEL 6.1 5.02.00-k5
RHEL 6.2 5.02.00.00.06.02-k10
Table 7 Supported iSCSI in kernel driver versions (page 2 of 2)
OS Driver version