Filter
Top Products
Fibre Channel and FCoE out of kernel driver versions
59
Installing and Configuring the Linux Host with the QLogic Driver
Fibre Channel and FCoE out of kernel driver versions
The following installation information is contained in this section:
◆ “Supported out of kernel driver versions” on page 59
◆ “Installation instructions for the out of kernel QLogic driver” on
page 61
◆ “Uninstallation methods for the QLogic v7.xx.xx/v8.xx.xx
driver” on page 76
◆ “QLogic SANsurfer and SANsurfer CLI” on page 47
◆ “QLogic v7.x and v8.x series driver parameters” on page 79
Supported out of kernel driver versions
Note: Only the QLogic v7.07.xx and the v8.01.xx driver provides support for
the 4 GB-capable QLA24xx/QLE24xx-series adapters, not the less version
driver.
Table 5 lists the QLogic out of kernel driver versions supported with
corresponding OS updates. These driver versions require manually
installation.
Table 5 Supported FC and FCoE out of kernel driver versions (page 1 of 2)
OS Driver version Supported adapters
1/2 Gb 4 Gb 8 Gb CNA
RHEL3 U2 6.07.02-RH2
√
SLES8 SP3 6.05.00
√
RHEL3 U4
RHEL3 U5
7.01.01-RH1
√
SLES8 SP4 7.03.00
√
RHEL3 U8
RHEL 3.9
Asianux 1.0 SP3
7.07.04b6
√√