Filter
Top Products
Summary of installation steps
25
Installation Steps
4 Install the driver.
There are two states:
• In kernel For drivers listed in the
EMC
Support Matrix
as in kernel
drivers, there is no need to install
a driver since the process of
installing the operating system
has already included the driver.
Table 4 on page 49 lists
supported QLogic driver
versions .
If in kernel, proceed to Step 5.
For drivers listed in the
EMC
Support Matrix
as in kernel
drivers, there is no need to install
a driver since the process of
installing the operating system
has already included the driver.
Table 4 on page 49 lists
supported QLogic driver
versions .
If in kernel, proceed to Step 5.
For drivers listed in the EMC
Support Matrix as in kernel
drivers, there is no need to install
a driver since the process of
installing the operating system
has already included the
driver.
Table 7 on page 89 lists
supported QLogic driver
versions.
If in kernel, perform the steps
outlined in “Installation
instructions for the in kernel
QLogic driver in Linux 2.6.x
kernels” on page 91 to disable
the qla3xxx driver then proceed
to Step 5.
•Out of
kernel
“Installation instructions for the
out of kernel QLogic driver” on
page 61
“Method 2: Installing the QLogic
v7.xx.xx/v8.xx.xx driver via the
QLogic installation script” on
page 65.
Proceed to either “Installation
instructions for the out of kernel
QLogic driver” on page 96
Table 1 Installation steps (page 2 of 3)
Step Instructions For Fibre Channel, refer to For Fibre Channel over
Ethernet (FCoE), refer to
For iSCSI, refer to