Filter
Top Products
iSCSI out of kernel driver versions
111
Installing and Configuring the Linux Host with the QLogic Driver
alias scsi_hostadapter mptbase
alias scsi_hostadapter1 mptscsih
alias scsi_hostadapter2 qla4xxx
alias usb-controller usb-uhci
As specified in the driver installation output, a new ramdisk is
created automatically by the DKMS RPM installation.
If additional changes to the
/etc/modprobe.conf file are
required, create a new ramdisk manually:
cd /boot
mkinitrd initrd-$1.img $1
where $1 is the currently running v2.6.x kernel version.
Example:
cd /boot
mkinitrd initrd-2.6.9-22.ELsmp.img
2.6.9-22.ELsmp
6. Reboot the host.
Installing the QLogic v5.x-Series iSCSI driver via the QLogic installation script, Method two
This section guides you through the process of installing and utilizing
the QLogic iSCSI driver installation script for RHEL 4.0 or SLES 9
hosts. The installation script will build and install the QLogic iSCSI
driver and will modify the
/etc/modprobe.conf file in RHEL 4.0 or
/etc/sysconfig/kernel in SLES 9.
By default, the installation script will install the QLogic HBA SNIA
API libraries, the SANsurfer CLI, and iqlremote service.
In the
/etc/modprobe.conf file, the hostadapter line for the
qla4xxx driver will be appended. In the /etc/sysconfig/kernel
file the
INITRD_MODULES variable will be appended with qla4xxx.
Note: The Unisphere/Navisphere Host Agent requires that the disconnected
LUN 0 be reported.
1. Boot into the qualified and supported kernel onto which the
driver will be installed.