Filter
Top Products
86
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
Installing and Configuring the Linux Host with the QLogic Driver
where $1 is the currently running v2.6.x kernel version.
Example:
cd /boot
mkinitrd -v initrd-2.6.9-22.ELsmp.img
2.6.9-22.ELsmp
• For SuSE distributions, use:
cd /boot
mkinitrd -i initrd-$1 -k vmlinuz-$1
where $1 is the currently running v2.6.x kernel version.
Example:
cd /boot
mkinitrd -i initrd-2.6.5-7.201smp -k
vmlinuz-2.6.5-7.201smp
4. Reboot the host.
Displaying the QLogic v8.x-series driver parameter information via modinfo
The QLogic v8.x-series driver parameters and their definitions may
be viewed by using the
modinfo command. This command may be
used on any Linux kernel module.
Note: EMC does not support the failover functionality of the QLogic driver.
The modinfo command may be run on the qla2300, qla2xxx_conf,
and
qla2xxx modules. However, the parameter information is
reported only by the
qla2xxx module.
An example of the console output displayed when
modinfo is run on
the
qla2300 module is as follows:
[root@l82bi205 ~]# modinfo qla2300
filename:
/lib/modules/2.6.9-22.ELsmp/kernel/drivers/scsi/qla2xxx/qla2300.ko
version: 8.01.06
license: GPL
description: QLogic ISP23xx FC-SCSI Host Bus Adapter driver
author: QLogic Corporation
alias: pci:v00001077d00002312sv*sd*bc*sc*i*
alias: pci:v00001077d00002300sv*sd*bc*sc*i*
depends: qla2xxx
vermagic: 2.6.9-22.ELsmp SMP gcc-3.4