Filter
Top Products
Installing onto the boot device with the QLogic HBA v3.x-Series driver
179
Configuring a Boot Device on an EMC Storage Array
[mod_devel_kit]# make
IMPORT_TREE=/usr/src/linux-2.4.21-32.EL
IMPORT_VER=2.4.21-32.EL import
If your kernel version is other than the one mentioned above,
please execute the import command with your desired kernel
version accordingly.
IMPORTANT
!
The IMPORT_TREE variable should be the path to the selected
kernel sources to be used and the IMPORT_VER variable is the
kernel version without any arch or platform additions. For
example, the 2.4.21-32.EL.smp IMPORT_VER variable would
be 2.4.21-32.EL.
Obtain and configure the QLA40xx-Series HBA driver sources
1. Create the
scsi/ directory (in the mod_devel_kit/ directory
created in Step 3 on page page 168).
[mod_devel_kit]# mkdir scsi
2. Copy the EMC-approved QLogic driver package from the EMC
page on the QLogic website to the
temp/ directory.
This package contains the driver sources, install scripts, and
release documents.
3. Under the
temp/ directory, untar the QLogic driver installation
package and obtain the driver sources.
[temp] #tar -xvzf qliscsi-linux-
<driver-version>
-install.tgz
[temp] #cd qliscsi-linux-
<driver-version>
-install
[qliscsi-linux-
<driver-version>
-install]# rpm -ivh --noscripts
qla4xxx-
<driver-version>
.noarch.rpm
4. In the mod_devel_kit/scsi directory, copy the QLogic driver
source.
[scsi]# cp /usr/src/qlogic/
<driver-version>
/* .
IMPORTANT
!
Place the QLogic driver sources in the scsi directory which you
have created inside the mod_devel_kit path. DO NOT place the
driver sources in any other directory.