Filter
Top Products
52
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
Installing and Configuring the Linux Host with the QLogic Driver
a. For models QLE8140, QLE8142, QLE8150, and QLE8152 only.
b. For model QLE8042 only.
What next? If the driver version is not listed in Table 4, go to “Fibre Channel and
FCoE out of kernel driver versions” on page 59.
If the driver version is listed in Table 4, refer to the appropriate
section:
◆ “Installation instructions for the in kernel QLogic driver for Linux
2.4.x kernel” on page 53
◆ “Installation Instructions for the in kernel QLogic driver in Linux
2.6.x kernels” on page 55
SLES 11 SP1 (kernel < 2.6.32.13-0.4.1) 8.03.01.06.11.1-k8
√√√√
a
SLES 11 SP1 (kernel > 2.6.32.13-0.4.1
< 2.6.32.27-0.2.2)
8.03.01.07.11.1-k8
√√√√
a
SLES 11 SP1 (kernel > 2.6.32.27-0.2.2) 8.03.01.08.11.1-k8
√√√√
a
RHEL 6.0 8.03.01.05.06.0-k8
√√√√
a
SLES 10 SP4 8.03.07.03.06.1-k
√√√√
RHEL 5.7 8.03.07.03.05.07-k
√√√√
RHEL 6.1 8.03.01.12.10.3-k4
√√√√
RHEL 6.2 8.03.07.05.06.2-k
√√√√
Table 4 Supported FC and FCoE in kernel driver versions (page 4 of 4)
OS Driver version Supported adapters
1/2 Gb 4 Gb 8 Gb CNA