EMC P/N 300-002-803 Network Cables User Manual


 
76
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
Installing and Configuring the Linux Host with the QLogic Driver
/lib/modules/2.4.21-32.0.1.ELsmp/kernel/drivers/scsi/
install -o root -g root qla2200_conf.o
/lib/modules/2.4.21-32.0.1.ELsmp/kernel/drivers/scsi/
install -o root -g root qla2300_conf.o
/lib/modules/2.4.21-32.0.1.ELsmp/kernel/drivers/scsi/
depmod -a
make: Nothing to be done for
`/lib/modules/2.4.21-32.0.1.ELsmp/kernel/drivers/scsi/'.
depmod...
adding line: alias scsi_hostadapter2 qla2300_conf to /etc/modules.conf
adding line: alias scsi_hostadapter3 qla2300 to /etc/modules.conf
mkinitrd...
Installation of qla2300/qla2200 driver for 2.4.21-32.0.1.ELsmp
complete.
Ex: To load the qla2300 driver execute the following command:
# modprobe -v qla2300
Or Reboot the system for newly build ramdisk to load
qla2300 driver automatically for you
Installing the QLogic SNIA API library libqlsdm.so
in /usr/lib. API package is installed in the
/usr/src/qla2x00/ApiPkg path
Setting up QLogic HBA API library...
Please make sure the /usr/lib/libqlsdm.so file is not in use.
Done.
Example of the modified /etc/modules.conf:
[root@l82bi114 extra]# more /etc/modules.conf
alias eth0 e1000
alias eth1 e100
alias scsi_hostadapter mptbase
alias scsi_hostadapter1 mptscsih
alias usb-controller usb-uhci
options scsi_mod max_scsi_luns=255 scsi_allow_ghost_devices=1
post-remove qla2200 rmmod qla2200_conf
post-remove qla2300 rmmod qla2300_conf
alias scsi_hostadapter2 qla2300_conf
alias scsi_hostadapter3 qla2300Installing and Configuring the QLogic HBA and the s
A new ramdisk is created automatically by the RPM installation.
4. Reboot the host.
Uninstallation methods for the QLogic v7.xx.xx/v8.xx.xx driver
This section describes how to successfully uninstall the QLogic
v7.xx.xx/v8.xx.xx driver from a Linux host.
The method used to uninstall the driver is dependent upon the
installation package:
“Method 1: Uninstalling the QLogicv7.xx.xx/v8.xx.xx driver via
QLogic DKMS RPM” on page 77