Filter
Top Products
146
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
Connecting to the Storage
Configuring persistent binding using the SANsurfer GUI
Note: This example in this section uses a v5.x-series driver. The same basic
steps would apply for the v3.x-series driver.
To configure persistent binding using the SANsurfer GUI, complete
the following steps.
1. Launch the SANSurfer GUI Utility.
# /opt/QLogic_Corporation/SANSurfer/SANSurfer
The following window displays:
2. Select the Target Options > Target Settings.
3. Click on the + icon near the bottom right of the screen.