Filter
Top Products
88
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
Installing and Configuring the Linux Host with the QLogic Driver
parm: ql2xexcludemodel:Exclude device models from being marked as failover
capable.Combine one or more of the following model numbers into an exclusion mask:
0x20 - HSV210, 0x10 - DSXXX, 0x04 - HSV110, 0x02 - MSA1000, 0x01 - XP128.
parm: ql2xlbType:Load Balance Method : (0) None (1) static load balance
and Default : 0 All the luns exposed on the first active path : 1 For
static load balance across active optimised controller ports
parm: qlFailoverNotifyType:Failover notification mechanism to use when
a failover or failback occurs.
parm: MaxRetriesPerIo:How many total retries to do before failing the
command and returning to the OS with a DID_NO_CONNECT status.
parm: MaxRetriesPerPath:How many retries to perform on the current path
before failing over to the next path in the path list.
parm: MaxPathsPerDevice:Maximum number of paths to a device. Default 8.
parm: failbackTime:Delay in seconds before a failback is performed.
parm: recoveryTime:Recovery time in seconds before a target device is
sent I/O after a failback is performed.
parm: ql2xfailover:Driver failover support: 0 to disable; 1 to enable.
alias: pci:v00001077d00002432sv*sd*bc*sc*i*
alias: pci:v00001077d00002422sv*sd*bc*sc*i*
depends: scsi_mod
vermagic: 2.6.9-22.ELsmp SMP gcc-3.4