Filter
Top Products
Configuring persistent binding for the Linux QLogic iSCSI HBA
141
Connecting to the Storage
4. Configure Target Parameters
5. Add A Target
6. Configure Target Authentication Menu
7. List LUN information
8. Save Target changes
9. Set Working Adapter
10. Refresh
11. Exit
enter selection:
3
3. Select the desired target ID to be unbound:
Target ID: 2 IP: 51.50.51.198 Port: 3260
ISCSI Name:
Alias:
State: No Connection
Target ID: 3 IP: 51.50.51.199 Port: 3260
ISCSI Name:
Alias:
State: No Connection
Target ID: 4 IP: 51.51.51.198 Port: 3260
ISCSI Name:
Alias:
State: Session Failed
Target ID: 5 IP: 51.51.51.199 Port: 3260
ISCSI Name:
Alias:
State: Session Failed
Target ID: 6 IP: 51.50.51.198 Port: 3260
ISCSI Name: iqn.1992-04.com.emc:cx.apm00033300794.a0
Alias: 0794.a0
State: Session Active
Enter a Target ID:
6
4. Select 11 to exit the menu.
Note: For information on reconfiguring devices, refer to “Device
reconfiguration procedures for the iSCSI 3.x driver” on page 196 or “Device
reconfiguration procedures for the iSCSI 5.x driver” on page 198.