Filter
Top Products
136
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
Connecting to the Storage
Configuring the QLA40xx-Series HBA to discover iSCSI targets
The Ethernet IP and the iSCSI targets must be configured for the
QLogic iSCSI QLA40xx-Series HBAs.
To perform these tasks, knowledge is required of the Ethernet
infrastructure topology, the IP addresses to be used for the HBA, and
the IP addresses of the iSCSI ports on the targeted EMC storage
arrays.
IMPORTANT
!
Either the QLogic SANsurferCLI text-based utility or the QLogic
SANsurfer GUI must be used to perform these configuration tasks.
Both the SANsurfer CLI and the SANsurfer GUI may be
downloaded from the EMC-approved section of theQLogic
website.
For more information, refer to the appropriate documentation on
http://www.qlogic.com.
What next?
Select either text-based or GUI configuration method:
◆ For a text-based method of configuring persistent binding using
the QLogic SCLI, refer to “Configuring persistent binding using
SANsurferCLI” on page 138 or consult the QLogic SANsurferCLI
User Guide.
◆ For a GUI-based method of configuring persistent binding using
the QLogic SCLI, refer to QLogic SANsurfer User Guide.