Filter
Top Products
32
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
Installation Steps
QLogic offers adapters for each bus/slot type available. Table 2
shows each of the EMC-supported QLogic adapters, and their
respective slot requirements. Be sure to consult both your server user
guide and QLogic to ensure that the adapter you want to use is
compatible with your server's bus.
Remember that some of the older adapters are tall (also referred to as
full-height) and may not fit into a server with a low-profile chassis.
These factors must be considered before implementing your
configuration to avoid unnecessary delays and possible equipment
swaps or returns.
Currently, the QLogic FCoE converged network adapters (CNAs)
require servers that can accommodate full-height, full-length PCI
Express adapters. Always refer to the EMC Support Matrix for the
Table 2 Slot requirements of EMC-supported QLogic adapters
Adapter model Protocol PCI spec BUS length Power Slot key
QLA2200F FC PCI 2.1 64-bit 3.3V, 5V Universal
QLA200 FC PCI-X 1.0a & PCI 2.2 32-bit 3.3V, 5V 3.3V
QLA210 FC PCI-X 1.0a & PCI 2.2 32-bit 3.3V 3.3V
QLA2310F FC PCI-X 1.0a & PCI 2.2 64-bit 3.3V, 5V Universal
QLA2340LF FC PCI-X 1.0a & PCI 2.2 64-bit 3.3V, 5V Universal
QLA2342LF FC PCI-X 1.0a & PCI 2.2 64-bit 3.3V, 5V Universal
QLE2360 FC PCI Express x4 lane 3.3V n/a
QLE2362 FC PCI Express x4 lane 3.3V n/a
QLA2460 FC PCI-X 2.0a & PCI 2.3 64-bit 3.3V 3.3V
QLA2462 FC PCI-X 2.0a & PCI 2.3 64-bit 3.3V 3.3V
QLE2460 FC PCI Express x4 lane 3.3V n/a
QLE2462 FC PCI Express x4 lane 3.3V n/a
QLE220 FC PCI Express x4 lane 3.3V n/a
QLE2560 FC PCI Express x4 lane 3.3V n/a
QLE2562 FC PCI Express x4 lane 3.3V n/a
QLE8042 FCoE PCI Express x8 lane 3.3V n/a
QLE8140/8142 FCoE PCI Express x4/x8 lane 3.3V n/a
QLE8150/8152 FCoE PCI Express x4/x8 lane 3.3V n/a