Filter
Top Products
Monitor: Other Commands
10006757-02 PmPPC7448 User’s Manual
11-19
DEFINITION: coninfo
crc32
The crc32 command computes a CRC32 checksum on count bytes starting at address.
DEFINITION:
crc32 address count
date
The date command will set or get the date and time, and reset the real-time clock (RTC)
device.
DEFINITION: Set the date and time.
date [MMDDhhmm[[CC]YY][.ss]]
Display the date and time.
date
Reset the RTC device.
date reset
echo
The echo command echoes args to console.
DEFINITION:
echo [args..]
enumpci
The enumpci command enumerates the PCI bus if the PmPPC7448 is the Monarch board.
DEFINITION:
enumpci
getmonver
The getmonver command prints the monitor version string of the currently running moni-
tor (default). Specifying the optional socket or soldered parameter prints the version string
for the corresponding device.
DEFINITION:
getmonver [socket, soldered]
go
The go command runs an application at address addr, passing the optional argument arg to
the called application.
DEFINITION:
go addr [arg…]