A SERVICE OF

logo

Setup: Troubleshooting
10006757-02 PmPPC7448 User’s Manual
2-11
3 Align the P11 and P12 connectors and gently press the module into place until firmly
mated.
Caution: To avoid damaging the module and/or baseboard, do not force the module onto the
baseboard.
Figure 2-7: Installing the Module
4 Using four M2.5x5 mm panhead screws (Emerson part #10006275-00), secure the
PmPPC7448 module from the bottom of the baseboard. First, insert and tighten the screws
closest to the P11 through P14 connectors. Next, insert and tighten the screws nearest to
the front panel.
TROUBLESHOOTING
In case of difficulty, use this checklist:
!
PmPPC7448
P14
P13
P11
P12
Tighten these two screws first.
PMC1
PMC2
J11
J12
Reset
Serial
J14
J13
J21
J22
J23
J24