Filter
Top Products
Development Mezzanine Card: DMC Setup
10006757-02 PmPPC7448 User’s Manual
10-11
DMC SETUP
You need the following items to set up and check the operation of the Emerson DMC.
❐ A compatible PPMC board, such as the Emerson PmPPC7448
❐ Card cage and power supply
❐ CRT terminal
When you unpack the board, save the antistatic bag and box for future shipping or storage.
Caution: Do not install the board in a rack or remove the board from a rack while power is applied, at
risk of damage to the board.
Installing the DMC Card
Use the following procedure to attach the DMC to the PmPPC7448
(see
Fig. 10-8 for DMC location):
1 Remove the protective vinyl caps from the screws.
2 Line up the screws with the threaded holes on the bezel from the bottom side of the
PmPPC7448.
3 Snap the connectors (P1) together and secure the mounting screws through the standoffs
on the DMC to the PmPPC7448.
!