Filter
Top Products
114
Maintaining Your EPSON Stylus Scan
8. Press down the ink cartridge clamp until it locks in place.
Then press the
R
cleaning button and release it quickly.
The printer moves the print head and begins charging the
ink delivery system. (Even if you don’t press the button, ink
charging begins 60 seconds after you close the clamp.)
The
P
power light flashes and the printer makes various
sounds. Charging takes about 60 seconds. When it’s
finished, the
P
power light stops flashing and stays on.
9. Close the front cover.
Replacing the Black Ink Cartridge
You can replace a cartridge when the
B
black ink out light is
flashing, or when it stays on.
1. Follow steps 1 through 4 on pages 112 and 113.
2. Pull up the black ink cartridge clamp. The cartridge rises up
from its holder.
3. Lift the cartridge out of the printer and dispose of it
carefully.
caution
Never turn off the
printer while the
P
power light is
flashing, unless the
printer hasn’t moved or
made any noise for more
than 5 minutes.
caution
Don’t open the clamp or
remove a cartridge except
to replace it with a new
one. Once you remove a
cartridge, you can’t reuse
it, even if it contains ink.
warning
If ink gets on your
hands, wash them
thoroughly with soap
and water. If ink gets
into your eyes, flush
them immediately with
water. Keep ink
cartridges out of the
reach of children.