Filter
Top Products
116
Maintaining Your EPSON Stylus Scan
3. Press the
E
load/eject button and hold it down for about
three seconds until the print head moves to the color
cartridge replacement position. The
P
power light begins
flashing.
4. If you need to replace the color ink cartridge, go on to
step 5 below. If you need to replace the black cartridge
only, press the
E
load/eject button again and release it
quickly to move the print head to the black cartridge
replacement position.
5. Remove the old ink cartridge and install the new cartridge
as described on page 113. Don’t press the
R
cleaning
button, however.
6. Press the
E
load/eject button and release it quickly.
The printer moves the print head and begins charging the
ink delivery system. The
P
power light flashes and the
printer makes various sounds. Charging takes about
60 seconds. When it’s finished, the
P
power light stops
flashing and stays on.
caution
To avoid damaging the
printer, never move the
print head by hand.
caution
Never turn off the
printer while the
P
power light is flashing,
unless the printer hasn’t
moved or made any
noise for more than
5minutes.