Filter
Top Products
122
Solving Problems
Problems and Solutions
Here are some basic troubleshooting tips if you have any
problems setting up your EPSON Stylus Scan, installing
software, or getting good quality printouts or scanned images.
Since copying involves both printing and scanning, look for
copy problems in both “Solving Printing and Copying
Problems” on page 124 and “Solving Scanning and Copying
Problems” on page 132.
Solving Problems Setting Up the EPSON
Stylus Scan or Installing Its Software
The printer started making noise after you installed the
ink cartridges.
■
The first time you install ink cartridges, the printer must
charge its ink delivery system for a few minutes. Please
wait until charging is finished (the
P
power light stops
flashing) before you turn off the printer. Otherwise, you
will waste ink.
■
Make sure the ink cartridge clamps are locked down
completely and that no packing material remains in the
printer.
The printer has finished charging the ink cartridge,
but the
P
power light is still flashing.
■
Make sure the ink cartridge clamps are locked into place.
■
Make sure all packing material has been removed from the
printer.
■
If the printer is not moving or making noise, but the light is
still flashing after 5 minutes have passed, turn the printer
off. If the light is still flashing when you turn it back on,
contact your dealer or see “Where To Get Help” on
page 137.