Filter
Top Products
140
Notices
Macintosh System Requirements
■
iMac
™
series or Power Macintosh
®
G3 with built-in USB
port
■
Mac
®
OS 8.1 or later (8.5 or later recommended)
■
At least 32MB of available memory (64MB recommended)
■
At least 50MB of free hard drive space (100MB
recommended)
■
VGA or better monitor (24-bit color recommended)
■
Double-speed (2
x
) CD-ROM drive (quad-speed [4
x
] or
faster recommended) for installing the printer software
■
Available USB port or hub connection, with shielded USB
“AB” interface cable, from Series A (computer) to Series B
(EPSON Stylus Scan), up to 6.5 feet (2 m) long
Location Requirements
■
Place the EPSON Stylus Scan on a flat, stable surface that
extends beyond the base in all directions. The EPSON
Stylus Scan will not operate correctly if it is tilted or at an
angle.
■
Avoid locations with high temperature or humidity, direct
sunlight or dusty conditions, poor ventilation, subject to
shock and vibration, or near sources of heat or
electromagnetic interference, such as a cordless telephone
base unit.
■
Leave enough room around the EPSON Stylus Scan to
allow for sufficient ventilation.
■
Place the EPSON Stylus Scan near a grounded wall outlet
where it can be easily unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche
peut être débranchée facilement.
note
If you’re using
Mac OS 8.1 on an
iMac, you need to install
the iMac Update 1.0
before installing the
EPSON Stylus Scan
software. This update is
available online from
the Apple
®
Web site.
If you’re running
Mac OS 8.5 or later,
Apple recommends that
you install the iMac
Update 1.1.
caution
Don’t use an outlet that
can be turned off by a
wall switch or timer, or
one on the same circuit
as a large appliance.
This may disrupt the
power, which can erase
the printer’s memory or
damage its power
supply.