Filter
Top Products
Notices
139
8
Notices
NoticesNotices
Notices
This chapter includes system and environmental requirements,
safety instructions, and other important information about your
EPSON Stylus Scan 2000.
Windows System Requirements
■
An IBM
®
compatible PC with at least a 486/66 MHz (for
Windows 98) or 486/25 MHz (for Windows 95) processor
(Pentium
®
processor recommended)
■
Microsoft
®
Windows 95 or 98
■
At least 16MB of RAM (32MB or more recommended)
■
At least 50MB of free hard disk space (100MB
recommended)
■
VGA or better display adapter and monitor (24-bit color
recommended)
■
Double-speed (2
x
) CD-ROM drive for installing the
software (quad-speed [4
x
] or faster recommended)
Your system should have one of the following interfaces (USB
recommended):
■
Available USB port or hub connection, with shielded USB
“AB” interface cable, from Series A (computer) to Series B
(EPSON Stylus Scan), up to 6.5 feet (2 m) long
■
A high-speed, bidirectional, IEEE-1284-compliant parallel
cable (6 to 10 feet long); the cable must have a D-SUB,
25-pin, male connector for your computer and a 36-pin,
Centronics
®
compatible connector for the printer
caution
Using an improperly
shielded USB cable—
especially a cable more
than 6.5 feet long—may
cause the EPSON
Stylus Scan to
malfunction.