Filter
Top Products
128
Solving Problems
Your printout is blurry or smeared.
■
Make sure your paper isn’t damp, curled, or loaded face
down (the printable side should be loaded face up).
■
Try using Automatic mode. See page 41 for instructions.
■
Use a support sheet with special paper or film, or try
loading it one sheet at a time.
■
Run the Print Head Alignment utility. See page 117 for
instructions.
■
Check the paper thickness lever position. If ink smears
when you print on thick paper, set the lever to the
+
++
+ position, as shown below. Make sure you return it to the
0
00
0 position when you print on regular paper.
note
Make sure your Media
Type setting matches
the paper you’re using.
See page 49 for
guidelines. For the best
printouts, use EPSON
papers and other
media.