Filter
Top Products
Settings for Windows 2000/NT
6-11
4. Click the
NetBEUI
tab, and make the following settings.
use NetBEUI:
Check this box when using NetBEUI. This check box is
dimmed when the NetBEUI protocol is not supported with
the network adapter.
NetBIOS name:
Enter the printer’s NetBIOS name which is the computer
name on the network (up to 15 characters). Be sure to use a
name that is unique on the network. The default name is
"EPxxxxxx" (xxxxxx are last 6 digits of the MAC Address).
Workgroup name:
Enter the workgroup name or domain name (up to 15
characters) used for the Windows network environment.
Device name:
Enter the printer’s device name (up to 12 characters). LPT1,
LPT2, LPT3, and COM cannot be used.