Filter
Top Products
The EpsonNet Configuration Utility
10-7
Setting menus
About passwords
A password is required to configure the network adapter. When
you click
OK
in the setting dialog box or click the
Return to
default
button, the Password dialog box appears.
1. To set a password or to change the current password, click
Change
.
2. In the Administrator password dialog box, enter a password
(up to 20 characters) and click
OK
. Passwords are case
sensitive.
Note:
❏
The same password is used for EpsonNet WinAssist,
MacAssist, and WebAssist.
❏
Since the new password becomes effective after sending the data
to the network adapter, enter the old password immediately after
changing the password.
❏
If you forget your password, you need to initialize the network
adapter. See “Initializing the Network Adapter” on page 1-6 for
instructions.